Shop
Primes substrates for AVAL and ATLAS thin-coat renders – mineral, acrylic, silicone hybrid (acrylic-silicone) and mosaic AVAL KT 77 (ATLAS DEKO M).
Increases adhesion – strongly adheres to the substrate and the applied renders.
Limits the absorbability of the substrate – prevents excessive transfer of water from the freshly applied renders into the substrate. The main characteristics • ensures ideal adhesion of the render
• reduces absorbability and strengthens the substrate
• facilitates render application and texture forming
• unifies the substrate colour
• available in several colours The main parameters • consumption: ca. 0,3 kg / m²
• adhesion: > 1.0 MPa
• drying time: 4 ÷ 6 h
Contains aggregate – increases the adhesion owing to significant development of the effective surface between the layers (creates rough surface).
Protects the substrate against adverse effects caused by the new layer – constitutes a chemical barrier between the substrate and the render, limiting their interaction – limits colour penetration from the substrate and occurrence of stains on the surface of the render.
High adhesion – min. 1.0 MPa to concrete.
White priming agent – additionally available in three colours (clinker, brown, graphite) as a priming mass for AVAL KT 77 (ATLAS DEKO M) mosaic renders and other colourful thin - coat renders.
AVAL KT 16 colour
(available in 15 kg and
25 kg packages only)
Number of AVAL KT 77 (ATLAS DEKO M) render
Brown
120, 221, 316, 512, 513, 514 and 516
Clinker
121, 220, 319, 320, 416, 417, 418 and 517
Graphite
122, 219, 314, 315, 419, 420, 518, 519 and 522
AVAL KT 16 is manufactured on the basis of acrylic resin and quartz powder.
Density of the ready-to-use product
ca. 1.5 g/cm³
Adhesion to concrete
> 1.0 MPa
Mass preparation temperature,
substrate and ambient temperature during work
from +5°C to +30°C
Drying time
4 ÷ 6 h
Shop
