Shop
ATLAS ESKIMO - setting accelerator for renders and paints
Description Enables rendering and painting in the temperature of 0°C– recommended during façade works in lower temperatures (0 – 10°C) and high air humidity (above 80%). The main characteristics • enables rendering and painting at 0°C
• enables rendering and painting in high air humidity (above 80%)
• accelerates the coat setting time
• gives early resistance to rain
• neutral to other properties of the material The main parameters • mixing proportions: 1% of weight, i.e. up to 0.25 kg (the whole bottle) for 25 kg of render and up to 0.15 kg (3/5 of the bottle) for 10 l of paint.
• density: ca. 1.1 g/cm³
Accelerates water evaporation from the applied render or paint – accelerates the first setting stage of dispersion products – water evaporation from the applied material. Therefore, the second stage, consisting in binder setting and drying, can start earlier – the applied material becomes resistant to rapid temperature drop and precipitation earlier (already after about 6 - 8 hours).
Easy to use – it is a ready-to-use additive added to the material directly before its application on the façade, easily mixing with the rendering mass or the paint.
Neutral to other properties of the material – does not lead to deterioration of durability or functional parameters after setting.
No change in the colour of the ready-to-use render or painting coat.
ATLAS ESKIMO is a yellow liquid with smell of the ammonia.
Relative density
ca. 1.1 g/cm³
Temperature of use
from 0°C to +10°C
Shop
